Kann mir jemand von euch sagen sie groß die Behälter der Hülsenpoliermaschinen von Lyman im Durchmesser und Hohe sind?
Ankündigung
Einklappen
Keine Ankündigung bisher.
Hülsenpoliermaschine
Einklappen
X
-
Welchen meinst Du. ?
Das ist der Pro Magnum
Q: What are the bowl dimensions?
A: Unsure as I SOLD mine sometime back!!!
Regards,
Terry L. Shook
Terry S. | 3 months ago
A: Approximately 1 foot diameter.
LexusJ | 3 months ago
A: 16 inches, with a total capacity of 2 gallons.
D and D Outdoors | 3 months ago
A: The bowl's mouth is 8 1/2"; the bowl is 12" wide by 5 1/2" deep. I would advise against this machine. I used it three times and it stopped. I took it apart (not easy) and repaired it once and it ran for one more session. If you do buy it, there are four mounting screws for the motor that can be accessed from the bottom. These must be kept tight. If they're loose, it allows play in the rubber shock mounts for the motor and they disintegrate. That's what happened to mine. see less
Pg | 3 months ago
A: Large, I don't know the exact dimensions but I do know I can clean about 1000 40 S/W or 9mm or about 800 357/38 cases in one setting. see less
John M. Hunter | 3 months ago
A: The mouth is 9" dia, mid bowl dia is 12" and depth is 6".
Adrian C Farris | 3 months ago
A: I mouth of the bowl is 8 3/4" wide. Depth of bowl is 5 1/4" deep. The bowl at its widest is 12 3/4". see less
LookingForGreatStuff | 3 months ago
Das ist der 1200er
A: The longest distance is 9 in. at the widest part. 8 in. at the top and bottom. 4 in. high. More room than it looks. see less
David A. Gramann | 2 years ago
A: The bowel is 9 inches wide from side to side. It 4 inches from the side to the spindle and it is approx. 4 and a half inches tall. It does a good job of polishing and holds allot of items. see less
Dan Cee | 2 years ago
A: It is approximately 3 3/8" tall from the deepest point of the bowl to the top lip and roughly 3 3/4" from the bowl to the cone that sits around the center spindle. see less
Aaron N. | 2 years agoZuletzt geändert von erich74; 02.09.2015, 23:21.
Kommentar